The floor is an essential part of the decoration and maintenance of any home and deserves significant attention. Even taking proper care, a residence floor gradually deteriorates, leaving it with a worn and unpleasant look.
Floor Restoration Tips
To bring back the shine and make it look new again or reinstalling flooring, the option of repairing should always be considered since it usually comes out more than simply changing all the material. Check now some tips for floor restoration that you cannot be without knowing!
Wood Floor
The wooden floors are visually pleasing and leave an elegant atmosphere. Therefore, they usually have a higher price for the installation. Thus, opting for revitalization is a way to justify the higher amount paid when purchasing this material.
Pay attention to the dimensions of the floor you want to repair. It must be at least 2 cm thick; otherwise, the coating will appear after sanding. Generally, this procedure is more advisable for a floor or putter.
When the floor has some damaged parts, and there is a need to replace them, the scraping process leaves them with a homogeneous appearance to the rest of the area. With this, it avoids that unpleasant appearance and a huge color difference.
Another essential factor that justifies the option to restore the floor is that it is a sustainable measure, as it avoids the waste of wood.
Here’s how to do this correctly:
- Get The Furniture Out Of The Room
The wood floor restoration process generates a lot of dust, not to mention the demand for chemical products. Therefore, the idea is to remove all furniture from the area where the procedure will be performed. Then, please wait at least 18 hours to put them back in the room.
- Fill In The Holes And Imperfections
First of all, it is necessary to make the floor uniform. To do this, use an acrylic mass suitable for wood. This material can be found in colors similar to the floor, making it a great option to disguise the most varied wear and tear. Nowadays, wood powder and glue are no longer used for this filling, as this type of coating comes off quickly.
- Sand Very Well
The most important step in revitalizing the floor is scraping: the damaged surface must be sanded gently. If the damage is minor, you can opt for a hand-held sander. In the case of general deterioration, it will be necessary to use a wooden floor sander, which readily serves a larger area. Such equipment is usually found for rent.
- Do A Thorough Cleaning
After sanding the floor, clean it thoroughly. The scraping process generates a lot of residues and dust, which affects the final result. Use a broom and also vacuum the entire area of the room.
- Finish With The Finish
After the floor has been sanded and thoroughly cleaned, it will be ready to receive the finisher, responsible for rescuing the wood’s shine. You can choose between varnish, resin, or wood impregnator.
Varnishes are usually based on formaldehyde, while resins are made with water (which makes drying faster). This revitalization process can be carried out on all types of wood, from resistant ones to less dense ones, and that mark more. However, it should be noted that, after many scrapes, the edges of the floor fitting are weakened, increasing the possibility of cracks or breakage of the pieces. This process can usually be carried out on the same floor three to five times.
