Five Important Factors to Think About when Picking Tiles

Picking the right tiles for your home can get a little overwhelming, especially if you don’t have much knowledge about floor tiles. Sometimes, tile design can be prioritized over other properties making the ordeal even more complicated. To choose the right tiles for your home, there are many factors to consider including:

Where to Install the Tiles

Different tiles have different properties and resistances to kinds of wear and tear. You need to pick tiles depending on whether you want to install them indoors or outdoors. For example, porcelain tiles must be installed indoor while ceramic tiles can be best laid out outdoors. Also, take into account the foot traffic that the area may have. Keep in mind that the state of tiles will be affected by the number of people will frequent it.

Durability and Resistances

Every kind of tiles has their own finishes which makes them durable or resistant to factors such as moisture. Surely, a number of finishes impact the durability, slip-resistance, and stain of a tile. To ensure you pick the right tiles, consider its level of tolerance against projected moisture, wear and tear, and foot traffic. Club Ceramic can give you more information on this.

Maintenance Cost

In general, ceramic and porcelain tiles are easy to clean compared to a lot of natural stones such as marble and granite. The latter requires occasional sealing to avoid staining. But, the majority of ceramic and porcelain tiles can be cleaned easily with only a cloth because their surfaces are resistant to water. But, you must also consider the grout. For any kind of tile installation, grout must be sealed.

Tile Thickness

Standard ceramic tile thickness ranges from 6mm to 140 mm while porcelain tiles can be as thick as 18mm to 19 mm. Tiles that are 3-5mm thick are also available. This provides you with more eco-friendly options as these tiles use less raw materials to be produced.

But, remember that thin tiles require special installation methods, care, and materials compared to what a lot of tile settlers are used to. It is important to factor ion tile limitations and conditions. The thickness of the tiles adds up to their overall durability and strength. Generally, thicker tiles tend to be stronger and more applicable for heavier traffic areas than thinner tiles.

Material

Porcelain, ceramic, and vinyl tiles are some of the commonly used kind of flooring materials that have a range of designs. They have their unique aesthetic and technical properties so some of them may be ideal for certain areas in your house.